NONCOMBUSTIBLE FENCES REDUCE POTENTIAL HOME IGNITIONS
Many wildfire educational programs, along with the Insurance Institute for Business & Home Safety (IBHS) recommend noncombustible fencing products when placed within five feet of a building. As a necessary component, fencing located within the zero to five-foot noncombustible zone should be constructed of noncombustible materials.
A noncombustible zone (withing 1-5′ of a house or other structure) minimizes the likelihood of wind-blown embers igniting fine fuels (such as bark mulch) located close to the building. Ember-ignited mulch can result in a radiant heat and/or flaming exposure to the building’s exterior. Using noncombustible fencing where it attaches to the building reduces the opportunity of a burning fence igniting the exterior of the structure. Fencing products are often available in eight-foot pieces and use of that full section of noncombustible material is recommended. Observations made during the 2012 Waldo Canyon fire in Colorado Springs, CO provided evidence that burning fencing generates embers that can result in additional ignitions down-wind.
When neighboring buildings are located within 20 feet of each other, use of steel fencing for the perimeter area can serve as a radiant barrier, providing added protection should a neighboring building ignite and burn. Research in Australia demonstrated the ability of panelized steel fencing to resist a radiant heat exposure.
RESEARCH FINDINGS TO HELP AVOID FENCE IGNITIONS
Recent research conducted by IBHS and the National Institute of Standards and Technology (NIST), both independently and in a collaborative project, provided additional information about the vulnerability of combustible fencing.
- Use a noncombustible fence section when it’s attached to a building.
- The area at the base of the fence should be kept clear of debris. Flame spread to the building will be more likely if fine vegetative fuels (e.g., pine needles, leaf litter and small twigs) have accumulated. Avoid placement of combustible mulch near the fence.
- A fence design that allows for greater air flow, such as a single panel lattice fence, makes it more difficult for wind-blown embers to accumulate at plank, or lattice panel to horizontal support locations. If an ignition occurs, it’s also more difficult for lateral flame spread to occur in the fencing material. Fence ignitions from wind-blown embers are more likely to occur at locations where vertical fencing planks attach to horizontal support members.
- The most vulnerable fencing from this perspective is a “privacy” fence, where the fence planks are on the same side as the horizontal support members. A fence built from lattice that’s applied to both sides of the support posts may be desired for privacy or other landscaping purposes, but should be avoided in wildfire-prone areas. Recent research at NIST has demonstrated that fi re growth and lateral flame spread are much greater in this design style.
- Vinyl fencing is not vulnerable to ember exposures alone, but did burn when subjected to flaming exposures from burning debris. Vinyl fencing will deform if subjected to radiant heat.
Resource credit: FIRESafe MARIN
- Home Survival in Wildfire-Prone Areas: Building Materials and Design Considerations: ANR Publication 8393 15
- Home Landscaping for Fire. University of California Publication 8228. 2007. University of California, Davis.
- www.readyforwildfire.org. Wildfire is Coming: Are You Ready. CAL FIRE. 2012.
- Urban Forestry Associates. Ray Moritz, Urban Forester and Fire Ecologist.
- Protecting Your Home From Wildfire. 2017. Insurance Institute for Business & Home Safety
Prepare your Home
Seven ways residents can reduce wildfire risk infographic by NFPA
Download the free wildfire safety infographic with seven tips for residents to help protect their homes in an event of a wildfire.
Wildfire risk reduction safety tips by NFPA
By working together, residents can make their own property, and their neighborhood, much safer from wildfire.